Jupiter, FL · South Florida Marinas · All Vessel Sizes
Professional color change vinyl wraps for boats and watercraft — deeper color, better protection, and full reversibility. In and out of the marina faster than a paint job.
The Material
A color change boat wrap is a premium 3M precision-cast vinyl film applied directly over your existing hull gelcoat or paint. It completely transforms the color and finish of your vessel — with no sanding, priming, or spraying required.
It's the same professional-grade 3M cast vinyl trusted for high-end, high-durability wrap work: UV-resistant to hold its color in the Florida sun, tough, and easy to keep clean. We select the films and finishes that hold up best for a boat that lives outdoors and on the water.
When you're ready for a new look — or selling the boat — the wrap removes cleanly, leaving your original gelcoat untouched and protected underneath.
Request SamplesThe Process
We review your vessel, discuss your color direction, and provide physical film samples. We'll advise on finishes that hold up best for your hull shape and typical conditions.
The hull is cleaned, decontaminated, and inspected. Any loose gelcoat, wax residue, or oxidation is addressed before film is ever touched. Prep is everything.
Film panels are measured and cut to your hull geometry. Each panel is applied using professional technique — heat guns, squeegees, and recessed-edge work for a factory-finish result.
We do a joint walkthrough to inspect every edge, seam, and curve. Your boat goes back in the water — typically within 1–3 days depending on vessel size.
Why Wrap Instead of Paint
A traditional bottom or topside paint job means weeks in the yard, significant cost, and permanent commitment to that color. A vinyl wrap delivers the same visual transformation — often better, with a depth of finish paint can't achieve — at half the cost and timeline.
Changed your mind? Ready to sell? The wrap removes cleanly without damaging the factory gelcoat underneath. Your hull stays protected the entire time it's wrapped.
Marine paint jobs are expensive and labor-intensive. A full color change wrap typically runs 40–60% less than a comparable spray application — without sacrificing finish quality.
No spraying, no cure time, no waiting on painters to schedule around weather. Most vessels are wrapped and back in the water in 1–3 days. Larger yachts in under a week.
The vinyl adds a sacrificial layer of UV and abrasion protection over your gelcoat. Dock rash, rope scuffs, and sun fade hit the wrap first — not your hull.
Finish Options
From deep ocean solids to mirror-chrome and carbon fiber textures — 3M cast vinyl comes in a huge range of finishes that simply aren't possible with conventional marine paint. Choose what fits your vessel and your vision.
Clean, deep, high-gloss or satin solids in any color. From classic white and navy to bold custom hues — the most popular choice for full hull transformations.
The low-sheen look that's dominated superyacht design for the last decade. Sophisticated, modern, and striking — especially on dark hulls.
Textured carbon fiber pattern films for accents, console wraps, helm stations, and hull details. Adds a performance aesthetic without the weight or cost of real carbon.
High-impact chrome and mirror films for vessels built to be noticed. Best used for accent panels, below-the-waterline stripes, and statement details rather than full hulls.
Combine any two finishes for a split hull, racing stripe, or accent panel design. We can work from your sketch, your brand colors, or an inspiration photo.
Vessel Types
From center consoles to sportfish towers to full-length motoryachts — if it floats and you want it a different color, we can make it happen.
Hull wrap, console wrap, or both — center consoles are among the most popular candidates. Clean lines make for excellent results.
Full hull transformations including topsides, boot stripe, and tower accents. We handle multi-surface projects as a single scope.
Large-format hull projects with pattern-matched panel runs. We have experience with express cruisers and full-length motoryacht hulls.
Quick, affordable full wraps for day boats and runabouts. Popular for freshening up a vessel before a season or a sale.
Full color change wraps for personal watercraft. Finished in a day. Great for matching to a tow vessel or trailer.
Hull wraps for monohulls and catamarans below and above the waterline. Wrap works over both gelcoat and existing topside paint.
Wrap vs. Paint
| Vinyl Wrap | Marine Paint | |
|---|---|---|
| Typical turnaround | ✓ 1–3 days | 2–4 weeks |
| Cost relative to paint | ✓ 40–60% less | Baseline |
| Reversible / removable | ✓ Yes — gelcoat protected | ✗ Permanent |
| UV & scratch protection | ✓ Sacrificial layer | Paint only |
| Finish options | ✓ Matte, chrome, carbon, metallic | Gloss & satin only |
| Dust / fumes / masking | ✓ None | ✗ Required |
| Lifespan | 3–5 years | 5–10 years (varies) |
| Color change flexibility | ✓ Wrap, remove, re-wrap | ✗ Sand and repaint |
Below Deck — Interior Refinishing
A fresh hull color is only half the story. Using the same architectural refinishing films we install in hotels and commercial interiors — 3M DI-NOC and LG Hausys Benif — we can completely change the look of the surfaces inside your boat or yacht without demolition, sanding, or a haul-out. Wood grain, carbon, matte, stone, or solid color: it modernizes a dated cabin in days, dockside or on the water.
Refinish helm stations, dash panels, and console surrounds in wood grain, carbon fiber, matte, or solid finishes — a cleaner, more modern command center without rewiring or rebuilding.
Tired teak or dated laminate in the galley and cabin gets a brand-new look. We wrap cabinet faces, counters, table tops, and trim in durable, wipe-clean film.
Wall panels, bulkheads, ceiling soffits, and door faces are refinished to match your vision — light and airy, or deep and contemporary — across the whole interior.
From the head to the staterooms to the salon, every interior surface is a candidate. Coordinate finishes throughout the vessel for a cohesive, designed result.
Yacht Armor™ — Surface Protection
Yacht Armor™ is a different product from a color-change wrap or a decorative refinish. It's an optically clear, heavy-duty protective film that shields your surfaces without changing how they look — an invisible layer of armor over high-value gelcoat, paint, and interior finishes. Use it on the outside of the boat to defend against dock rash, UV, and salt, and inside to keep high-touch surfaces looking new.
A clear sacrificial layer over gelcoat and paint. Takes the dock rash, rope scuffs, fender marks, and UV so your finish underneath stays factory-fresh.
Bow stems, rub rails, swim platforms, boarding areas, and below-the-rail strips — the spots that take the most abuse get an invisible shield.
Protect tables, counters, helm surfaces, and trim from scratches, spills, and sun exposure — all while keeping the original look completely intact.
A tough, optically clear film that resists yellowing, abrasion, and staining — easy to clean and built to hold up to sun and weather.
Get a Quote
Every vessel is different. Share your boat details and color direction and we'll come back with a project estimate — usually within one business day. No commitment required.